1.00 DN (Directory
Number)
Button
Assignment
Assigning various fearures to me DN buttons of
The explanation
of the message display applies
individual PITS telep?one is
explained
here.
only to a PITS with the display.
Operation
Resu H
Comment/Note
I. Set the MEMORY switch at
l
The following message
l
This status is called "initial
the rear of PITS to
appears on the display:
display for PITS station
"PROGRAM."
programming
mode."
Lz!!l
PITS-PGM No.?+
l
If the programming
data of your
SET. - PFtoGRAu
PITS has already been
MEMORY
l
The MEMORY button indicator
accessed by another
lights in red.
administration
device, the
following message appears on
the display.
Already Accessed
l
From now on in any status,
pressing the END button
restores this status.
!. Press the appropriate
DN
l
Previously stored data appears
l
When the following messages
button.
on the display:
appears on the display,
'/I/
changing the assigned feature
cExamMl
is impossible in this mode, and
can be changed only by the
system programming.
l
The MEMORY button indicator
light goes out and the
associated DN button indicator
lights in red.
""am&,
(Primary Directory Number)
l
If nothing is entered within one
minute after pressing the DN
button, "Initial display for
-PtB station programming
Irm$ber)
mode" is displayed again.
cExam*]
(Private CO)
cExamf*i
(UCD Log in)
12-c-2
'Exam~~
Continued