World Select 1 (Wsl) - Panasonic KX-T336 System Reference Manual

51.00 World Select 1 (WSI)
Description
'WSl' command provides the following six assignments,
(Password level: Two or higher)
(1)
(2)
(3)
Interdigit Pause (For Dial Pulse Trunk)
Interdigit Pause is used to distinguish between pulse signals.
To meet the requirements of your central office, select the appropriate value
that represents the delay between dial pulses.
This setting is only required when using dial pulse trunks.
Pulse Type (For Dial Pulse Trunk)
The system supports the following three types of dial pulse signaling.
Select the appropriate option to your area.
Normal Type, New Zealand Type, and Sweden Pulse.
This setting is only required when using dial pulse trunks.
Automatic Redial Retry Count
Automatic Redialing will be repeated 15 times automatically by-defauft and
can be administered within 1 to 32 times.
(4) Automatic Redial Retry Interval
Automatic Redialing will be repeated at a 40-second intenral automatically
by defauft and can be administered within 10 to 320 seconds.
Refer to Section 4-C-4.04 "Automatic Redial" for funher information.
(5) % Break Detect (SLT)
Dialed digits from diil pulse type Single Line Telephone (SLT) is transmitted
to the System by making and breaking a loop current (dc path), thereby
interrupting loop current.
Duration time required to detect the number of breaks depends on the SLT
connected and can be administered to '16 to 96 ms" or "16 to 136 ms" by
thii command.
(6)
Flash Detect (SLT only)
ft is assignable that the Flash signal transmitted from SLT is detected or not
by the system.
_. .-
.P .y., _
If V=No" is selected, the system does not detect the Flash signal
transmitted from SLT.
0 : No (Flash signal transmitted from SLT is not detected by the system)
1 : Yes (Flash signal transmitted from SLT is detected by the system)
Input Format
~pz--~I(~~)~~
Index Number
None
1 o-c-77
(40993)