Panasonic KX-T336 System Reference Manual page 283

Hide thumbs Also See for KX-T336:
Table of Contents

Advertisement

3.00 Other Error Messages
Error Messaae
1
Probable
Cause
Illegal parameter
Unacceptable
value is assigned.
Parameter
is not
consecutive
Space exits between
items.
Countermeslire
Assign an allowable
value.
Remove the space.
This parameter
cannot assign
Set the assignable
value.
Assigned
selection
value is not for the item.
Duplicate
parameter
The number
which is set previously
in this
definition
internal
screen is assigned
again.
Set the number
different
from the previous
number.
Duplicate
parameter
The number
which is set previously
in a differen
Set the number
different from the previous
definition
external
screen is assigned.
number.
Not installed
Device is not installed.
Assign the installed
device.
Invalid status
Status of the specified
device does not accept
this command.
Change
the status of the device to be
acceptable
for the command.
Diagnostic
failure
Execute test.
Diagnostic
error is checked
when In-Service
command
is executed..
Insufficient
privilege
Privilege
level is lower than specified
level.
Increase the privilege
level through
the
Change
level function.
Failure
Repair the malfunctional
card.
Port test is made during
a card malfunction.
Service
violation
Check specified
service.
,
Specified
service is not executed.
Another
maintenance
device
(remote,
PITS,
system) is in use.
Wait until another
device is finished
or let him
finish.
Already
accessed
by another
device
Printer is not connected
to the system or the
power is off.
Printer is not ready
Connect the printer, and make the power on.
C,annot print out in
remote
Print out.-isunavailable
from Remote.
Execute print out on-site.
Waiting
Changing
of program
data is suspended
because
call placement
is going on.
Wait for a while or cancel the setting by
'CTRL+C"
Calender
IC trouble
Calendar
IC malfunction.
Repair calender
IC.
Device error
Backup
device is not connected
(only when
maintenance
device is ATT).
Connect the backup device to SIO # 1 Port.
Match the backup
version.
Communication
line is defective,
or backup
data is destroyed.
Version
error
Checksum
error
Different version
at the time of backup.
A checksum
error has been detected.
9-M-7

Advertisement

Table of Contents
loading

Table of Contents