Panasonic KX-T336 System Reference Manual page 426

8.00 Changing Walking COS
Password
This is used to change the walking COS password
for performing Walking COS.
For further information about Walking COS, refer to
Section 4-C-9.00 "Walking COS (Class of
Service)."
Operation
1. Set PITS system program-
ming mode.
Result
Comment/Note
* The message appears on the
l
Refer to Section 11 -C-l .OO
display: "Entering PITS System
Programming Mode."
SYS-PGM No ? 4
l
The MEMORY button indicator
lights in red.
2. Dial "0 6." (program number)
l
Current password appears on
WafkPW: 1111
l
The MEMORY button
indicator light goes out.
. .
3. Dial new password: four
digits.
l
Dialed password appears on
l
Values from 0 to 9, * , # can be
the display: entered for the password.
<Example>
Walk PW: 5555
I
4. Press the MEMORY button.
l
The MEMORY button A
to store the newly dialed- indicator lights in red.
password.
l
Confirmation tone sounds.
11-C-18