Panasonic KX-T336 System Reference Manual page 418

Operation chart for changing extension number
<Status 1>
c zyyn programming )
11
linitial display for PITS system
programming mode
I
<Status 2>
w
CHG DN?
+ DN
The MEMORY button indicator light goes
out.
To designate the extension that you want
to change, dial the directory number of ths
extension : three or four digits.
l
To designate the extension which has the
lowest directory number, press the NEXT
button.
l
To designate the extension which has the
highest directory number, press the NEXT
button and then the PREV button.
W
The message appears on the display to
require you to enter the new directory
number.
I
Dialed number appears on the display. 1
l
Press the MEMORY button to store the
w
Confirmation tone sounds.
The MEMORY button indicator lights in
red.
1
.
I
Note:
I
Pressing the END button in any status after <Status
l>
restores <Status l>.
Pressing the SELECT button in any status after <Status 2>
restores <Status 2>.
* You can also advance to the next directory number by
pressing the NEXT button and return to the previous
directory number by pressing the PREV butron.
l
To return to the previous directory number
l
The MEMORY button indicator light goes
a Operation
0 Result
11-c-10