Panasonic KX-T336 System Reference Manual page 482

Display Example
To change the extension number "1000," name "James,"
department "Sales" to "1000, White, Product" :
Conditions
DIC~SET1000/James/Sales lOOO/Whiie/Product
ti
-Totallentry
sHHHc, Set complete
An extension number can be three or four digits.
An extension name can be up to 16 characters including letters,
numbers and special characters (except ", *, 1, -), and the first digit
should be a letter.
A department can be up to eight characters including letters,
numbers and special characters (except ", *, /, -), and the first digit
should be a letter.
. .
Make sure not to leave a space within a sub command.
For example, if you enter: SET 1 OOO/James/Sales ~1 OOl/James/
Div 4, an error message appears on the screen and you cannot
change the data.
In this case use special characters such as "-" to separate words as
"Div4.".
Usage of Wild Card Character
One character tiD can be used as a wild card character which
substitute any
character
in that position.
The wild card character cannot be used for sub parameters of new
data.
<Example l>
If the following entries are stored:
I
No.
I
Extname 1
Dep I
. . .
13-B-l 0