Panasonic KX-T336 System Reference Manual page 141

Description
of Assigning Items
1st
through 12th Hundred Block Assigns the leading one or two digits for extension DN (Directory
Extension Number). If the leading digit is not programmed the DN assignment
is not possible.
Conditions
"System-Numbering Plan" setting cannot be changed if "System-Operation",
Numbering Plan is set to "Fixed 1" or "Fixed 2." If "Flex" is selected, this setting is
changeable.
,.x\_
-1
When entering "DG 1" to "DG 4," the cursor does not advance nor return automati-
cally. Use the + and t keys to move the cursor. The BS key cannot be used in
this screen.
In any other setting screens than this screen, if you enter some data and press the
NEXT or PREV key without storing the data, the message y ****** Parameter
Save OK ? >n appears on the screens. However, this screen advances or returns
without displaying the message.
Data storage is executed by the PF 4 (Memory) key or the PF 2 (End) key for all
the nine screens at the same time, not respectively as other screens. Logical
check is also performed according to the following logic:
Extension numbers are three or four digits and the leading one or two digits
are assigned in "Numbering Plan (l/9) and (2/S)" screens.
Feature numbers may be one, two, three or four digits.
Those numbers assigned in Numbering Plan screens cannot include the
same number assigned to other feature number as the part or whole of it.
For example, if the digit "2" is assigned to the feature number for 'Trunk
Group 01-08 Access" and another digits "21" is assigned for "Trunk Group
09-l 6 Access," it is checked at the time of data storage. Similarly, "35" and
"351" cannot be present at the same time.
1
It is possible to store "0" through "9, " *," "#," as the feature numbers.
However, if *" or "#" is included in the feature numbers, those features are not
accessed by the rotary telephone extensions.
1 st to 12th Hundred
Block Extension
Extension numbers cannnot include Y3Cn and "#."
9-D-34