Panasonic KX-T336 System Reference Manual page 488

2.00 DELETE Command
Description Used to delete the entries registered in
the
Speed Dial Dictionary.
Input Format SPD > DELETE 001 to 200 (speed dial code)
input Example To delete
speed
dial code 100, enter :
SPD > DELETE 100
Display Example When deleting speed dial code
100 :
SPD> DELETE 100
delete data
El
No. name
100
white
yy+y+ Total 1 entry
-X.X+-+ Delete OK ? (Y/N) => Y
- Delete complete
Conditions
When the message 'Delete OK? (Y/N) =>" appears, press "Y" then the
RETURN key to delete the data.
Not to delete the data, press "N" then the RETURN key.
Usage of Wild Card Character
One character *' can be used as a wild card character which
substituteb any character in that positian.
<Example>
To delete the speed dial code from 100 through 199, enter :
SPD > DELETE 1*
This function deletes the speed
dial codes
and the names from the
Speed Dial Dictionary screen, but does not affect the data in the
system programming.
Displayed Message
Disolaved Messaae
Meaning
L
+-M+ Error: Illegal main command
- Error: Illegal sub command
- Delete OK ? (Y/N) =>
- Delete complete
- Error: Input data do not exist
+-+++ Delete abort
+-++ Total 3 entries
There is an error in the main command.
There is an error in the sub command.
Confirmation message
Deleting is completed.
Entered data does not exist.
Did not delete the specified data.
There are three entries to be deleted.
13-C-2