World Select 2 (Ws2) - Panasonic KX-T336 System Reference Manual

52.00 World Select 2 (WS2)
Descrlptlon
WSZ" command provides the following six assignments.
(Password level: Two or higher)
(1) First Dial Timer
(2)
(3)
On outgoing CO calls, the system waits at least 0.5 seconds after seizing
the CO line, before sending the dialing digits required by the central off ice.
This allows the central off ice enough time to accept the dialing digits
correctly.
Defauft setting is 1 .O second and can be ranged from 0.5 to 8.0
secondS.
EQU Access
Used to activate or deactivate the ECU Access feature on a system-wide
basis. If P(" is selected by this command, brogramming screen of "Special
Carrier Access' Equal Access is not accessible.
OCC Access
Used to activate or deactivate the OCC Access feature on a system-wide
basis. lf 75" ls selected by this command, programming screen of 'Special
Carrier Access" OCC Access is not accessible.
(4)
Outgoing CO Back Tone
(5)
(6)
On outgoing CO calls, dialed number is toned out, which informs the
extension users that dialed number has been dialed.
CO Dialing Tone is usually toned out by defautl setting, select 'N" to turn off
the CO dialing tone.
L-COT Busy Out Looprelay
When CO line is busied out either manually by the operator or automatically
by the system, the state of Loop Relay is controlled by this setting.
G-COT Busy Out Looprefay
When CO line is busted out either manualfy by the Operator 1, or
automaticalfy by the system, the state of Loop Relay and Ring-FG are
controlled by this setting.
Input Format
Index Number
None
1 o-c-79