Panasonic KX-T336 System Reference Manual page 610

J on-
qe will
lf
vided)
z8
Dumb
C-24.00
7
C-26.00
ARM
5
m) or is
)a
star 1 of
e
fetects
lice.
ne same
'pears
r display
7. The alarm message on the display of PITS :it
provided) disappears when placing a call
from
that telephone: when an incoming call arnves
at that telephone; or if a held call reminder
occurs with it. And the alarm message
appears again when PITS goes to idle.
Operation
To display an alarm message, press the ALARM
key (button) while ALARM LED is flashing or lit
steadily.
If local alarm occured during a conversation,
press the ALARM key (button) after replacing the
handset then the alarm message will be
displayed.
l
An example of the alarm display
(Attendant Console)
JAN-2591 6:31 AM MAJOR-ALARM #0410
Basic Shelf power down
(PITS)
1 ERR 0410 POW DWN 1
To clear the displayed alarm n&sage, press the
ALARM key (button) when the alarm message is
displayed. ALARM LED will be turned off and the
alarm display on the display of PITS (if provided)
or CRT screen of the Attendant Console
disappears.
Lion
a up the system administration from a
location can be done in the following ways.
'Remote Directory Number" using Direct
rd System Access (DISA) feature.
Jtther information about "Remote Directory
oer," refer to Section 1 O-C-4.00 "Operation
I)."
'or further information about DISA feature,
to 3-D-2.02 "Direct Inward System Access
4)."
*am DID feature so that the incoming
lone number is converted to the "Remote
tory Number."
irther information about DID feature, refer to
an 3-D-2.03 "Direct Inward Dialing (DID)."
n that a call from a remote location can
is the Remote Administration feature
iatically using DIL (1 :l) feature.
lrther information about DIL (1 :l) feature,
/ to Section 3-D-2.01 "Direct In tine (DIL)."
f
l
RI
bte access with assistance of the operator
T
all from a remote location can be made on
unk into the system, and be answered by
aerator.
all is then placed on hold and the Remote
:ory Number of the system dialed is
,ed.
perator transfers the call after receiving the
m answer tone.
aller at a remote location will then hear the
m answer tone and can be proceed with
In.
to Section 4-F-l .05 "Unscreened Call
fer to Remote" for further information.
le system administrator at a remote
accesses the system remote
tration feature, the following message
on the display of operator's telephone if
s provided.
1234:RMT Access
J
log in to the system from a remote
you can operate the system in the same
f you were on-site.
Onl) 3 system administration terminal can
accf he system at a time.
15-D-2