Panasonic KX-T336 System Reference Manual page 611

i
1.05 Remote Alarm
Description
Conditions
When the system detects a problem during on-
line communication, an error message appears
on the screen of the remote maintenance device.
For remote access, RMT card must be installed
in the system, and a data terminal and modem
are required at a remote location.
Setting "Remote Alarm" to "Y" is not available if
the RMT card is not installed.
All systemdetected error messages are
displayed in the error log, but for "Local Alarm,"
and "Remote Alarm", some error messages are
displayed and some are not.
Refer to Section 14-D-2.03 "Background
Diagnostic Error List." Remote Configuration
Main Unit
Data Terminal 4
RMT
Central
Ofke
Programming
To execute this feature, set "Remote Alarm" to
7" and register the telephone (Modem) number _
of the remote administration device in
'Destination Address."
Command Format
PRG>OPR AT2 J/
15-D-3