Panasonic KX-T336 System Reference Manual page 313

Hide thumbs Also See for KX-T336:

Table of Contents

Plan (NBP)" setting cannot be changed if "Operation (OPR)" Index 1,

Plan is set to "2 (Fixed 1)" or "3 (Fixed 2)." If "1" is selected, this setting is

Logical check is performed by every storage according to the following logic:

Extension numbers are three or four digits and the leading one or two digits

are assigned in this screen.

Feature numbers may be one, two, three or four digits.

Those numbers assigned in this screen cannot include the same number

assigned to other feature number as the part or whole of it. For example, the

digit "2" is assigned to the feature number for 'Trunk Group 01-08 Access" and

another digits "21" is assigned for 'Trunk Group 09-l 9 Access," it is checked at

the time of data storage.

Similarly, "35" and '351" cannot be present at the

It is possible to store "0" through '9, " *," "#," as the feature numbers.

However, if "*"

or "#I" is included in the feature numbers, those features are not accessed by the

rotary telephone

Extension numbers cannot include "*" and 3."

Hundred Block

Speed Dialing-

These feature numbers cannot include "#."

Station/Call

Forwarding-to

Trunk/Pickup

Chapters

Table of Contents