Panasonic KX-T336 System Reference Manual page 279

Error Message No.
Probable Cause
052
Extws on assgned to NEXT HUNT STATION is
a!:eazb assig.med to NEXT HUNT STATION for
ano!-er exterslon.
053
Re:a:lon between ICM group and Pickup group
ass;gr,ed for an extension is incorrect.
054
As PRV-CO is assigned by PITS button
assignment, impossible to change the type of
the trunk group
to any
other than PRV.
055
As assigned to Single CO by PITS button
assignment. impossible to change the 1:l
destination of the line to a different PITS.
056
Attempting to change the tenant of Trunk group
without canceling the setting of 1 :I destination.
057
058
UCD group is not assigned.
Attempting to assign DID to Trunk group which
has CO lines belonging to the group.
060
Attempting to assign the unstored ICM number
to the DSS (ICM) button.
Attempting to assign the ATT which is not
registered as the operator to the maintenance
1 111 idevice.
Specified CO line does not exist.
I
081
I
Specified CO line is not the PVL.
Specify proper CO line.
Specified CO line is already assigned as a DIL
1 :I or PRV-CO by another extension.
Impossible to assign because the programming:
for specified CO does not satisfy the condition.
084
Impossible to assign because the programmings
Change call placing type to 1 :N, and group
for specified CO does not satisfy the condition.
type to group.
090
101
Specified External Pager is not existing.
Attempting to delete the extension which is
registered as an operator of the tenant.
Specify an existing pager.
Cancel the assignment as an operator.
102
Attempting to delete the extension which is
registered as the destination of intercept routing
for the Trunk group.
103
Attempting to delete the extension which is
registered as an ATT busy out extension of
Trunk group.
Tl
Assign another extension or clear the
Make them in proper relation.
Cancel the assignment of the PITS button.
Cancel the assignment of the PITS button.
Change the tenant after clearing all 1:l
destinations of CO lines belonging to the
group.
Assign Pickup group to a UCD group.
Assign DID after clearing all CO lines
belonging to the group.
Assign stored ICM number.
Register the ATT as an operator, or specify
another device.
. .
Specify proper CO line.
Specify another CO line or cancel the
assignment of the desired line.
Change call placing type to 1 :l , or change
group type to unique type.
Cancel the assignment as the destination.
Cancel the assignment
as an ATT busy out
extension.
9-M-3