Panasonic KX-T336 System Reference Manual page 50

5.00 OUS (Out of Service)
Description
Allows you to change the status of shelves, cards
and ports from "In Service" to "Out of Service" as
shown below after pressing the COMMON (Fl)
key.
Conditons
The system should be in on-line communication
mode.
Operation
<Example>
Changing the status of the station (physical number
2158) from "In Service" to "Out of Service."
1. Press the F5 key.
n
~5
2. Enter the physical number of the station "2158."
n2mo
I
COMMON > Out of Service No. = 2158 t]
I
3. Press the RETURN key.
CMD > Out of Service No. = 2158 0
""'OK
Devices to be changed to "Out of Service" and
their entry numbers are as same as that of "In
Service." Refer to Section 7-J-4.00 "INS (In
Service)."
When setting the shelf or card to "Out of Service,"
their lower device such as stations & ports
become "Out of Service" simultaneously.
If it is impossible to set "Out of Service", one of the
following error messages appears on the screen.
A type of error message depends on the situation.
*****Error : Illegal parameter
*****Error : No installed
*****Error : Diagnostic failure
*****Error : invalid status
For details about the error messages, refer to
Section 9-M "Error Messsage Tables."
To repeat the "Out of Service" operation, repeat
from STEP 2.
To return to COMMON mode, press the EXIT (F7)
key.
l
"
l
' *
l
* OK" appears when the station
(physical number 2185) becomes "Out of
Service."
7-J-7