Panasonic KX-T336 System Reference Manual page 386

58.00 CO Access Instantly (CAI)
Description
When an extension user makes an outside call.
the sys:ez seizes a CO line (if
available) and sends out dial signal after
the toll restriction procedure in default
mode.
In some region, CO dial tone is returned to the system In a delayed timing.
If you want to send out dial signal after receiving the CO dial tone, program CO
Access Instantly feature.
When this feature is activated, a CO line is seized (if available) directly after
pressing a CO button or dialing a CO line access code.
Then the extension user can send dial signal to the central office after receiving
CO dial tone.
This feature is programmable on a trunk group basis.
In case of Local Trunk-Dial Access, system decides the mode by the top trunk
group of Local Trunk Hunt Sequence.
(1) Assigning "CO Access Instantly" on a Trunk Group
This feature can be assigned on a trunk group basis by entering CAI
command at dumb programming mode as follows.
Then enter w" to activate this feature, and enter "N" to deactivate this
feature.
<Example>
; PRG>CAI AT&R>
; Trunk Group No. 01 ______________________ N
INPUT>> Y <CR>
i Trunk Group No. 02 ______ - __-____------ N
INPUT>> Y <CR>
iTrunk Group No. 03 --------___---- - N
INPUT>> Y <CR>
i Trunk Group No. 04 ___- -__---__-_----- - N
; PRG>
INPUT>> $EOD <CR>
Input Format
Index Number
Index Number
Explanation
01 to 16 Trunk Group Number
Input Value for Index Number
m-l
Number
Assigning Items
None
CO Access Instantly
Y : Enabled
N : Disabled
(Default = N)
Input Value
1 o-c-95
(21292)