Panasonic KX-T336 System Reference Manual page 528

2.05 Changes of the Slot Status
Canceling the Slot Assignment
Before canceling the slot assignment, the s:arus
of ports or resources assigned to the target slot
should be changed to "Not-installed" or 'Pre-
installed" beforehand.
Slot Assignment
The status of ports and resources installed in the
target slot.
HLC --) Pre-installed
PLC --) Pre-installed
SLC --) Pre-installed
LCOT ---) Pre-installed
GCOT ---t Pre-installed
DID + Pre-installed
ATLC - Pre-installed
OPX + Pre-installed
DPH -+ Pre-installed
DISA - OUS
AGC -
OUS
RMT -
OUS
Resource (DTMF receiver) --) OUS
When you change the status of target slot, the
status of devices (port, resource) in the slot
changes as follows.
1. INS ---) OUS
Slot INS - OUS
Port INS - OUS
Resource INS ---) OUS
No changes in other status.
FIFO communication is terminated.
2. OUS - INS
Slot OUS - INS
Port
OUS - INS
Fault (defective device)
Resource
OUS - INS
Fault (defective device)
3. ISS + Fault
SrOi
INS --) Fault
Pon INS --) Fault
Resource INS 4 Fault
No changes in other status.
FIFO communication is terminated.
4. Fault --t INS
Slot Fault- INS
Port Fault- INS
Resource Fault- INS
No changes in other status.
FIFO communication begins.
In case of "3. INS---t Fault," "4. Fault--t INS
the "OUS" status of lower devices doesn't
change.
No changes in other status.
14-C-6