Panasonic KX-T336 System Reference Manual page 450

5.00 Automatic Answering
Selection
This feature automatically connects a PITS
telephone to a pre-assigned line when an
extension user lifts
the
handset or press the SP-
PHONE to answer incoming calls.
If "No tine Preference-Answering" is selected, no
line is connected to a PITS telephone by lifting the
handset or pressing the SP-PHONE button.
For further information about this feature, refer to
There are two options by which an extension user
may select a desired line.
l
Ringing Line Preference-Answering (Default)
l
Prime Line Preference-Answering
Section 4-D-l .OO "Line Selection-Answering."
The table shows the operation for each
programming. (The explanation of the message
display applies only to a PITS provided with the
display.)
Operation
Result
Comment/Note
1. Set the MEMORY switch at
l
The following message
l
This display is called "Initial
the rear of PITS to
appears on the display.
display for PITS-station
"PROGRAM."
programming mode."
PITS-PGM No.?+
l
If the following message
SET- * PRoGRAM
l
The MEMORY button indicator
appears on the display, the
lights in red.
programming data of your PITS
has already been accessed by
another administration device.
Already Accessed
2. Dial "01."
l
Preset data appears on the
l
From now on, in any status,
pressing the END button
restores this status. . .
. If nothing is entered within one
Pref. In ':No
. .'
3. To change the preset
l
To change the assignment,
feature, dial the program
simply dial the appropriate
number corresponding to the number again.
desired feature.
l
To set No Line Preference,
l
The following message
dial "1."
appears on the display:
Pref. In : No.
l
To set Ringing Line
l
The following message
Preference,
dial "2." appears on the display:
ABC
•l
2
Pref. In : Ring
1
- . I
Continuea