Error Message; If There Is A Wrong Entry In The Displayed Screen; The Following Appears On The Message; Is Incorrect - Panasonic KX-T336 System Reference Manual

D. Error Message Tables
1.00 Error Messages Related to
the Assigning Items in the
Same Command
If there is a wrong entry in the displayed screen,
the following appears on the message line when
The (XXX) indicates one of the error message
storfng the entry: 'DATA ERROR (XXX)."
numbers shown below and possible causes of the
errors and countermeasures for them are as
follows.
DATA ERROR No.
WW
Probable cause
Countermeasure
100 (page length)-(skip length) e 6 Make (page length)-(skip length) h 6.
101 (receive digit) 2 (delete digit) is not established
Make (receive digit)
r(delete
digit).
in - Special Attended DID screen.
102 Restriction Level-Operator $ Restriction Level- Make Restriction Level-Operation 6
International is not established in - Operation
Restriction Level-International
(l/3) screen
110
130
140
141
Day-night combination in the incoming mode is Change the day-night combination in
not correct
incoming mode.
Combination of the terminals of operators 1.2
Change the combination of terminals for
is incorrect.
operators 1.2.
--.
DN is not installed.
Designate the installed DN.
Attempting to assign FDN's of UCD # 1 to # 4
Set FDN of other UCD. or extension directory
for the overfbw destination of UCD # 5 to # 32 number.
. .
150
160
190
Attempting to assign its own extension number Specify the number except its own extension
on
the key which cannot be assigned to its own number.
extension number.
<example> DSS( ICM)
DSS(DN)
..+sPy .
Specifying UCD number incorrectly.
Assign UCD to'only one ICM.
Date
value
is incorrect on the check of month, Check the date setting.
and leap year in the time and date setting
screen.
1 O-D-l
(21292)