Panasonic KX-T336 System Reference Manual page 391

60.00 Polarity Reversal Detection (PRD)
Descrlptlon
When an R-LCOT card (KX-T96183) is installed, reversal of CO hne polarity
is monitored at each port by default.
The PRD command is used to deactivate this monitoring function, or to
activate this monitoring function when it has been deactivated.
This command is not valid when an R-LCOT card (KX-T96183) is not
installed in the system.
Input Format
Index Number
\ .
Index Number
Explanation
Four-digit number (1011 to 3158)
Physical number of the CO line port
Input Value for Item Number
Assigning Items
Polarity Reversal Detection
.,
Input Value
VOW
Y: Detects reversal of CO line polarity.
N:
Does
not
detect
reversal of
CO line polarity.
(Defauft=Y)
Programming
1 To enter the Dumb Programming mode 1
1. Press /=I key and
q
key simultaneously when Main Menu screen
is displayed at VT programming mode.
2. At the Dumb programming initial prompt (; > ), type:
;>PRG (-I)
The screen displays the programming prompt (PRG>) as follows:
; PRG>
1 o-c-1 00
(30393)