Panasonic KX-T336 System Reference Manual page 193

Description of Assigning Items
PICK
(01
to 32)
ICM Assigns the intercom group number which the call pickup groups belong to.
UCD Assigns the UCD (Uniform Call Distribution) group number which the call
pickup groups belong to. UCD Group is comprised of more than one pickup
group.
PAG
Assighs the paging group number which the call pickup groups belong to.
Paging Group is comprised of more than one pickup group.
Conditions
If "System-Operation (l/3)", Tenant Service is set to "Yes," "Group-ICWPaging
Group" setting must be done before setting this screen.
Pickup Groups must belong to any of the ICM groups. The tenant of a pickup group
is determined by the tenant of the ICM group to which the pickup group belongs.
When assigning a pickup group to a paging group, the tenant of the two groups
must be the same.
A UCD Group is composed of multiple pickup groups.
. Conditions of changing ICM Groups
1) The tenant of the old and new intercom groups must be the same, unless the
system is off-line.
2) All the extensions which belong to the old a_nd newly entered intercom groups
must not be currently used.
If any line is used, it is impossible to change.
Conditions of changing UCD group
All the extensions which belong to the c~~;fz~t and newly entered UCD groups
must not be curret%y used.
If any line is used, it is impossible to change.
Conditions of changing paging group
1) The tenant of the old and new paging groups must be the same, unless the
system is off-line.
2) All the extensions which belong to the old and newly entered paging groups
must not be currently used.
If any line is in use, it is impossible to change.
Table of relation between groups
A pickup group cannot belong to multiple intercom groups.
A paging group cannot belong to two tenants. A UCD group cannot belong to
multiple ICM groups.
9-E-l 5