Panasonic KX-T336 System Reference Manual page 435

Continued
Operation
I Result
Comment/Note
3. To change the preset
feature, dial the program
number corresponding to the
desired feature.
l
To assign DSS (DN) feature.
1) Dial '1."
•l
1
2) Dial a directory number
(three or four digits).
l
To assign DSS (ICM)
feature,
1) Dial '2."
ABC
Ia
2
I 1
2) Dial an ICM number (one
or two digit(s)).
The following message
appears on the display.
DSS(DN):
I
2) The dialed number appears
on the display.
I
1) The following message
appears on the display.
DSS(ICM):
I
2) The dialed number appears
on the display.
cExam*l
<Exam*1
(Single CO)
<Example>
1 Trunk Group:1 1
I
Grow CO)
If no feature is assigned to the
DN button, the following
message appears on the
display :
1 Not Stored
l
If the dialed number does not
exist as a directory number,
alarm tone sounds.
l
If you want to dear a wrong
entry, press the CLEAR button
and dial the correct number.
l
If the dialed number does not
exist as an ICM number, alarm
tone sounds.
l
If you want to clear a wrong
entry, press the CLEAR button
and dial the correct number.
12-C-3