Setting Date And Time; Storing Speed Dialing-System; Changing Extension Name - Panasonic KX-T336 System Reference Manual

A. Introduction
Description
Conditions
There are two programming types using PITS
The following are the conditions required to
(Proprietary In?egrated Telephone System):
execute PITS system programming:
1.
PITS system programming
2. PITS station programming
The extension must be assigned to "Yes" in
"System-Class of Service", Maintenance
Capability.
PITS system programming is performed in PITS
Refer to Section 9-D-4.01 "Class of Service
system programming mode. (Described in this
(l/2)" for information on system
section)
programming.
PITS station programming is performed in PITS
station programming mode. (Described in Section
'2)
PITS system programming is used to program the
following system data:
1)
2)
3)
4)
5)
6)
7)
Setting Date and Time
Storing Speed Dialing-System
Changing Extension Number
Changing Extension Name
Changing PITS System Program Mode
Entry Password
Changing DISA User Code
Changing Walking COS Password
1)
4
3)
4)
5)
6)
It is recommended to use PITS telephones
provided with the display, which are:
KX-T7030, KX-T7130, KX-T123235, KX-
T123230D, KX-T123230, KX-T61630, and
KX-T30830.
The system is on-line communication mode.
Password for PITS system programming is
required to enter into PITS system
programming mode. The password is
assigned in "System-Operation", PITS
Programming Password. (Refer to Section
9-D-l .03 "Operation (3/3).")
If Tenant
Service is employed, the password for
Tenant 2 is assigned in "System-Tenant",
PITS Programming.Password (Tenant 2).
It is impossible to enter into'PlTS system
programming mode if the system has
already been accessed by other System
Administration Devices, such as VT220,
compatibles, Attendant Console, Dumb
terminal, or if an extension in the same
tenant is in PITS system programming.
To enter into PITS programming mode, the
telephone set must be on-hook. If it is off-
hook or in the state of speaker phone
activated, programming mode is not
established even if the MEMORY switch is
set to the "PROGRAM" side.
11 -A-l