System Diagnostics; Test Items; Startup And Exit Of System Diagnostics - NEC Express5800 Series User Manual

7-4 Maintenance

SYSTEM DIAGNOSTICS

The System Diagnostics runs several tests on the CPU blade.
Select [Tool menu] - [Test and diagnostics] in the NEC EXPRESSBUILDER provided with the
CPU blade to diagnose the system.

Test Items

The following items are tested in system diagnostics.
Memory installed in CPU blade

CPU cache memory

Hard disk drive used as a system

IMPORTANT:
disconnect the target CPU blade from the network. Executing the
System Diagnostics with the CPU blade being connected to the network,
the network may be influenced.
NOTE:
disk.

Startup and Exit of System Diagnostics

There are two ways to diagnose the system: to use the local console (keyboard) connected to the
Blade Enclosure, and to use the management PC via serial port (remote console).
Refer to the User's Guide of the CPU blade for how to perform system diagnostics.
When executing the System Diagnostics, make sure to
On checking the hard disk drive, no data is written into the