Chapter 1 Maintenance
8.
System Diagnostics
System Diagnostics runs several tests on the server.
8.1
Test Items
The following items are tested in System Diagnostics.
•
Memory
•
CPU cache memory
•
Hard disk drive
8.2
Startup and Exit of System Diagnostics
Start up System Diagnostics in the following procedure. (If the server is running, shut it down.)
1. Start up EXPRESSBUILDER and select Tool menu from Boot menu.
For
information on
EXPRESSBUILDER).
2. Select Test and diagnostics.
Important When executing the system diagnostics, be sure to disconnect the LAN cable.
Executing the system diagnostics with the LAN cable connected may affect the
network.
On checking hard disk drives, no data is written to the disk.
Tips
starting
up
EXPRESSBUILDER,
Note
In case Language Selection menu appears, select English.
In Redirection mode, a message "Hit key to continue. [y|Y]" may appear. Press the <y> or
<Y> key.
Express5800/E120d-M Maintenance Guide
8. System Diagnostics
Chapter
2
(6. Details
refer
to
of
41