Forced Shutdown - NEC Express5800 Series Maintenance Manual

Chapter 1 Maintenance
7.3

Forced Shutdown

Use this function when an OS command does not shutdown the server, POWER Switch does not turn off the
server, or software reset does not work.
Continue to hold POWER Switch of the server for at least 4 seconds. The power is forcibly turned off.
(To turn on the power back again, wait at least 30 seconds after turning off the power).
Note If the remote power-on function is used, cycle the power once to load the OS after the
power has been forcibly turned off, and then turn off the power again by shutting down the
OS.
Express5800/E120e-M Maintenance Guide
7. Resetting and Clearing the Server
POWER Switch
(Keep pressing for at least 4 seconds)
43