Removing Dual Lan - NEC Express 5800 User Manual

Hide thumbs Also See for Express 5800:
Table of Contents

Advertisement

Removing dual LAN

TIPS:
To set dual LAN configuration, log on as "Administrator" or a member of the group
"Administrators".
1.
Display the [Intel(R)PROSet II] dialog box.
2.
Start one of the start menu modes below:
Standard start menu mode
Click [Intel(R)PROSet II] in [Control Panel] from the [Start] menu.
Classic start menu mode
(1)
(2)
3.
Remove all adapters from Duplication.
Right-click the following adapters on the control tree which is located on the left side
of the [Intel(R)PROSet II] dialog box and select [Remove from Team].
<For on-board >
-
-
<For option board >
-
-
-
You will then see the dialog box on the right of this paragraph. This is because one of
two teamed adapters constituting dual configuration is removed.
Click [Yes], to remove the adapter from Team.
Select [Control Panel] from [Settings] of the [Start] menu.
Double-click the [Intel(R)PROSet II] icon.
Status emb-82559 10/100 Enet Adapter
Status emb-82544GC Copper Gigabit Adapter
Status AA-U51500 10/100 Enet Adapter (100BASE-TX)
Status AA-U57000 Fiber Gigabit Adapter (1000 BASE-SX)
NEC 8490 XT Copper Gigabit Adapter (1000 BASE-T)
Windows Setup and Operation
3-37

Advertisement

Table of Contents
loading

Table of Contents