Setting The Destinations Of Traps From A Partition - Fujitsu PRIMEQUEST 1000 Series User Manual

3. Run the following command.
Syntax
MgmtIP.exe -f
2.2.6 Setting the destinations of traps from a
partition
For direct transfer of a SVmco expansion trap from a partition, set the trap
destination and SVmco trap notification by using the following procedure.
Remarks

SNMPv3 is not supported in Windows.

Make settings only as needed. Operations management software needs
these settings to manage events by partition.

The trap destination must be running both a trap receiving application
and a trap manager to be able to receive standard SNMP Service traps.

Operations
1. Click [Start] - [Administrative Tools] - [Services].
2. Double-click [SNMP Service] in the right side of the window.
>> The [SNMP Service Properties] dialog box appears.
SVmco User Guidel
60