Fujitsu PRIMEQUEST 1000 Series User Manual page 383

SVmco User Guide
igb:xxxx:xx:xx.x Adapter or Software error (Cannot change link
characteristics when SoL/IDER is active.)
Meaning:
The link setting cannot be changed.
%d: (Example) 1209
%r: Numerical value (1 to 3 digits)
Corrective action:
Collect the data for investigation (dump or fjsnap). Contact your sales
representative or a field engineer.
Severity:
Warning
Action:
( / /T/S)
11715
igb:xxxx:xx:xx.x Adapter error (Cannot do PHY loopback test when
SoL/IDER is active.) vendor-id=8086 device-id=%d revision=%r
Meaning:
The PHY loopback test cannot be executed.
%d: (Example) 1209
%r: Numerical value (1 to 3 digits)
Corrective action: An adapter failure may have occurred. Replace the
adapter.
375