５．２．Common Hot Plugging Procedure For Pci Cards - Fujitsu PRIMEQUEST 1000 Series User Manual

SVmco User Guide
For details on the fjpciswap command, see
(fjpciswap).
Replacement procedure
1. Confirm the physical location by using the display function of the
fjpciswap command.
2. Replace the PCI card by using the swap function of the fjpciswap
command.
3. Confirm the replacement card by using the display function of the
fjpciswap command.
Addition procedure
1. Add a PCI card by using the add function of the fjpciswap command.
2. Confirm the added card by using the display function of the fjpciswap
command.
５．２．Common Hot Plugging Procedure for
PCI Cards
This section describes the PCI card replacement procedure that does not
involve additional steps (e.g., when a redundant application is not used).
Note
Insert the PCI card securely.
3.6 PCI Card Operation Command
159