６．２．５．Settings After Svmco Installation - Fujitsu PRIMEQUEST 1000 Series User Manual


With [Accept SNMP packets from these hosts] selected:
If neither the MMB IP address nor localhost is set, SNMP security is
configured.
６．２．５．Settings after SVmco installation
This section describes the settings for items after SVmco installation.

Setting the destinations of traps from a partition

Configuring the Windows Firewall

Setting Watchdog for monitoring after a STOP error (fatal system error)

Installing the PSHED Plugin driver
Note
From [Properties] in the Event Viewer, do not change the operation in [When
maximum log size is reached] for the system log or application log to [Do not
overwrite events (clear log manually)]. Otherwise, after the log reaches the
maximum log size, no errors are output to the log, so SVagent will be unable to
detect any errors.

Setting the destinations of traps from a partition
For details on how to set the destinations of traps from a partition, see
Setting the destinations of

Configuring the Windows Firewall
traps.
SVmco User Guidel
2.2.6
222