3.3.2. Scanning with a Saved Scan Setting
1. Click the ScanSnap icon
The list of saved settings appears.
(The icon of the program that starts after scanning appears on the left of the setting name.)
2. Select the scan setting to use.
A check mark appears on the selected setting.
3. Load the document on the scanner.
4. Click the [SCAN] button on the
Scanning is carried out with the selected scan setting.
The scan button(s) vary in form and name depending on the scanner models.
fi-4110EOX2
.
New
scanner.
or
fi-5110EOX
24