Fujitsu PRIMEQUEST 1000 Series User Manual page 40

\: This indicates that there is no line feed.
2. If SVmco startup is in progress, execute the service command to stop
SVmco.
Syntax
/sbin/service y30SVmco stop
3. Execute the ps command to check whether snmpd is active.
Syntax
ps ax | grep snmpd
Example of output
If the command displays /usr/sbin/snmpd as follows, snmpd startup is in
progress.
# ps ax | grep snmpd
32611 ? S
var/run/snmpd -a
\: This indicates that there is no line feed.
0:04 /usr/sbin/snmpd -Lsd -Lf /dev/null -p \
SVmco User Guidel
32