Fujitsu PRIMEQUEST 1000 Series User Manual page 429

SVmco User Guide
An adapter error occurred.
%d: device id (e.g., F980)
%r: Numerical value (1 to 3 digits)
Corrective action:
Hardware or firmware has a fault. If the error keeps recurring, contact your sales
representative or a field engineer.
Severity:
Warning
Action:
(R/M/T/S)
12032
lpfc:xxxx:xx:xx.x Adapter error (Adapter failed to init; mbxCmd
READ_REV) vendor-id=10DF device-id=%d revision=%r
Meaning:
Initialization of the adapter failed.
%d: device id (e.g., F980)
%r: Numerical value (1 to 3 digits)
Corrective action:
Hardware or firmware has a fault. If the error keeps recurring, contact your sales
representative or a field engineer.
Severity:
421