Configuring Snmp To Use Duplicate Disks - Fujitsu PRIMEQUEST 1000 Series User Manual

SVmco User Guidel
# /etc/rc.d/init.d/snmpd restart
After that operation, a Cold Start trap is posted to the trap receiving application
at the trap destination. Cold Start is a standard net-snmp trap.
In the following example, the trap destination is a Linux machine. snmptrapd
runs on the Linux machine that is the trap destination to receive traps.
snmptrapd outputs the following message to the system log. Confirm that the
Linux machine received the trap normally.
Aug 17 12:00:53 pq-server snmptrapd[2600]: 2005-08-17 12:00:53 \
pq-server.
fujitsu.com [192.168.0.162](via 192.168.0.162) TRAP, SNMP v1, \
community
public NET-SNMP-MIB::netSnmpAgentOIDs.10 Cold Start Trap (0) \
Uptime: 0:00:00.17
\: This indicates that there is no line feed.

2.1.7 Configuring SNMP to use duplicate disks

This section describes the required settings for using duplicate disks.
Remarks
30