Chain OUTPUT (policy ACCEPT)
target
prot opt source
PSA-MMB_LAN all -- 0.0.0.0/0
Chain MMLAN (2 references)
target
prot opt source
ACCEPT
all -- 0.0.0.0/0
ACCEPT
all -- 0.0.0.0/0
ACCEPT
icmp -- 0.0.0.0/0
ACCEPT
icmp -- 0.0.0.0/0
ACCEPT
udp -- 0.0.0.0/0
ACCEPT
udp -- 0.0.0.0/0
ACCEPT
tcp -- 0.0.0.0/0
ACCEPT
tcp -- 0.0.0.0/0
ACCEPT
tcp -- 0.0.0.0/0
ACCEPT
tcp -- 0.0.0.0/0
4.
Save the firewall configuration.
# /sbin/service iptables save
Setting the destinations of traps from a partition
For details on how to set the destinations of traps from a partition, see
Setting the destinations of traps from a
Remarks
Make settings only as needed.
Operations management software, such as Systemwalker, needs these
settings to manage events by partition.
Configuring SNMP to use duplicate disks
destination
0.0.0.0/0
destination
0.0.0.0/0
0.0.0.0/0
0.0.0.0/0 icmp type 8
0.0.0.0/0 icmp type 0
0.0.0.0/0 udp dpt:161
0.0.0.0/0 udp spt:161
0.0.0.0/0 tcp dpt:24450
0.0.0.0/0 tcp spt:24450
0.0.0.0/0 tcp spt:5000
0.0.0.0/0 tcp dpt:5000
partition.
SVmco User Guidel
2.1.6
214