Setting The Destinations Of Traps From A Partition - Fujitsu PRIMEQUEST 1000 Series User Manual

SVmco User Guide
2.1.6 Setting the destinations of traps from a
partition

This setting is necessary only when you need to send trap.

Please execute this setting when Operation management software receive events
by trap.

Editing snmpd.conf
# vi /etc/snmp/snmpd.conf
Add the following lines according to the SNMP version used.
* The lines of definitions can be in any order.
trapsink HOST [COMMUNITY [PORT]] # SNMPv1 trap setting
trap2sink HOST [COMMUNITY [PORT]] # SNMPv2 trap setting
trapsess SNMPCMD_ARGS HOST[:PORT] # SNMPv3 trap setting
The following describes the settings in detail.

SNMPv1/SNMPv2 trap setting
trapsink HOST [COMMUNITY [PORT]]
trap2sink HOST [COMMUNITY [PORT]] # SNMPv2 trap setting
The setting defines the host receiving the trap (i.e., the trap destination).
# SNMPv1 trap setting
25