Setting The Management Lan Ip Address - Fujitsu PRIMEQUEST 1000 Series User Manual

MMLAN all -- 0.0.0.0/0
REJECT all -- 0.0.0.0/0
prohibited
Chain FORWARD (policy ACCEPT)
target prot opt source
REJECT all -- 0.0.0.0/0
prohibited
Chain OUTPUT (policy ACCEPT)
target prot opt source
MMLAN all -- 0.0.0.0/0
Chain MMLAN (2 references)
target prot opt source
ACCEPT udp -- 192.168.0.0/24 192.168.0.1 udp dpts:7000:7100
ACCEPT udp -- 192.168.0.1
ACCEPT udp -- 192.168.0.0/24 192.168.0.1 udp dpt:162
ACCEPT udp -- 192.168.0.1
ACCEPT udp -- 192.168.1.5
ACCEPT udp -- 192.168.0.1
ACCEPT udp -- 192.168.1.5
ACCEPT udp -- 192.168.0.1
6. Save the firewall configuration.
# /sbin/service iptables save

2.1.5 Setting the management LAN IP address

Set the partition management LAN IP address in SVmco.
ps ax | grep eecd
1. Confirm the eecd process starts.
0.0.0.0/0
0.0.0.0/0 reject-with icmp-host-
destination
0.0.0.0/0 reject-with icmp-host-
destination
0.0.0.0/0
destination
192.168.0.0/24 udp spts:7000:7100
192.168.0.0/24 udp spt:162
192.168.0.1 udp dpts:7000:7100
192.168.1.5 udp spts:7000:7100
192.168.0.1 udp dpt:162
192.168.1.5 udp spt:162
SVmco User Guidel
22