Fujitsu PRIMEQUEST 1000 Series User Manual page 20

inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:3865 errors:0 dropped:0 overruns:0 frame:0
2. Execute the ethtool command to find the NIC of the PSA-to-MMB
communication LAN. Enter the command as shown below for each
interface displayed in step 1. Then, check the results.
The NIC of the PSA-to-MMB communication LAN is bus-info
(SEG:BUS:DEV.FUNC number) 0000:00:19:00.0.
Syntax
/sbin/ethtool -i <interface name>
Example of output
The execution results for eth0 in the example show the matching NIC for
the PSA-to-MMB communication LAN.
# /sbin/ethtool -i eth0
driver: e100
version: 3.0.27-k2-NAPI
firmware-version: N/A
bus-info: 0000:00:19.0 (Corresponds to NIC of PSA-to-MMB
communication LAN)
SVmco User Guidel
12