Fujitsu PRIMEQUEST 1000 Series User Manual page 208

3. Referring to 5.3 NIC Hot Plugging
Administration Manual (C122-E108EN), replace the NIC.
Remarks
The error message "Source: SVagent, ID: 25004" may be output to the
event log during the replacement procedure. This message does not
indicate any problem.
4. Set an IP address for the replacement device.
Set the IP address and subnet mask recorded in step 2.
Remarks
If the following message appears when you set the IP address, select [Yes].
TCP/IP deletion message
SVmco User Guidel
in the PRIMEQUEST 1000 Series
200