５．５．Hot Replacement Procedure For Iscsi; ５．５．１．Confirming The Incorporation Of A Card With Mpd - Fujitsu PRIMEQUEST 1000 Series User Manual

５．５．Hot Replacement Procedure for iSCSI
The prerequisites for iSCSI (NIC) hot replacement are as follows.

The target system runs Windows Server 2008 or later.

The maintenance person has the Administrator privileges required for
operations.

The ETERNUS multipath driver (MPD) has been applied.

To replace more than one card, one card at a time will be replaced.
For details on the fjpciswap command, see Section
Command (fjpciswap)
Operations.
５．５．１．Confirming the incorporation of a card
with MPD
This section describes the procedure for confirming that a card has been
incorporated with MPD.
- Windows Server 2008
1. From the MMB Web-UI, click [System Status] - [Driver Monitor] to
search for the NIC to be replaced. You can search for the NIC to be
replaced from the Unit names or BUS numbers.
in Chapter 3 SVmco CLI (Command Line Interface)
SVmco User Guidel
3.6 PCI Card Operation
186