Command For Collecting Svmco Data For Investigation (Getosvmco) - Fujitsu PRIMEQUEST 1000 Series User Manual

SVmco User Guide
Remarks
(xxxx) is detailed information.
(4) End status
0: Normal end
>0: Abnormal end
(5) Notes
The following message may appear when you start SVmco with the y30SVmco
command. The command will be executed normally even if this message
appears.
/bin/mknod: `/dev/watchdog': The file exists.
3.4 Command for Collecting SVmco Data for
Investigation (getosvmco)
The getosvmco command batch-writes data for investigation, such as the
following SVmco failure data, to a single compressed file:

Installation status of application packages

Files and modules

Configuration files

Internal logs

Trace files
103