Serverview Suite - Fujitsu PRIMEQUEST 1000 Series User Manual

When these software is intalled by SVIM, SVIM judge machine type and install only
necessary software.
*1: PSA is system mangement software only PRIMEQUEST1000.
For detail, please refer PRIMEQUEST 1000 Series General Description Manual (C122-
B022-03EN).

1.1.2 ServerView Suite

The role for each ServerView components in partition is as below.

ServerView Operation Manager (SVOM)
To display hardware configuration and abnormal event on each partition.

ServerView Agents (SVagent)
To collect hardware configuration and detect abnormal event in partition.

ServerView RAID (SV RAID)
To collect hardware configuration and detect abnormal event for disk device and
SAS/RAID card.

ServerView Mission Critical Option (SVmco)
To notify event detected by SVagent to MMB and provide
PRIMECLUSTER/PRIMESOFT linkage function (onlu Linux).
When detect hardware problem, the following actions are executed according to event.
- REMCS report: sent from MMB
(REMCS from SVOM can not be used in case of PRIMEQUEST.)
- Mail report: sent from MMB or SVOM.
- Trap report: sent from SVagent orSV RAID
Trap report from MMB is not supported from PQ1000x2 (or later).
- Syslog or EventLog output: Output log by SVagent or SV RAID.
SVmco User Guidel
2