Fujitsu PRIMEQUEST 1000 Series User Manual page 422

lpfc:xxxx:xx:xx.x Adapter error (CONFIG_LINK mbxStatus Error) vendor-
id=10DF device-id=%d revision=%r
Meaning:
A CONFIG_LINK mailbox command was issued, but it failed.
%d: device id (e.g., F980)
%r: Numerical value (1 to 3 digits)
Corrective action:
Hardware or firmware has a fault. If the error keeps recurring, contact your sales
representative or a field engineer.
Severity:
Warning
Action:
(R/M/T/S)
12018
lpfc:xxxx:xx:xx.x Adapter or Software error (Ring handler)
Meaning:
The index of the response ring on the port side is larger than the ring size.
Corrective action:
A driver, hardware, or firmware has a fault. Contact your sales representative or
a field engineer.
Severity:
SVmco User Guidel
414