3.7 Firewall
Management LAN Interface (setmlanfw.sh)
The setmlanfw.sh command is a tool that supports the opening of the
necessary ports when the system has a firewall configured for the
management LAN interface and the system provides PRIMECLUSTER
linkage through the management LAN network.
This command opens the following ports for the specified IP
addresses:
snmptrap port: udp/162
rmcp+ port: udp/7000 to 7100
Note
If you need to change the firewall configuration, for instance, for changing the IP
address of the management LAN interface, delete the firewall configuration
according to the deletion procedure and then create the configuration procedure
again.
Remarks
This command is available only in Linux.
The user must have root privileges to execute this command.
Use the following procedure to execute this command.
Setting
Command
SVmco User Guidel
for
the
122