Fujitsu PRIMEQUEST 1000 Series User Manual page 433

SVmco User Guide
lpfc:xxxx:xx:xx.x Adapter or Software error (Enable interrupt handler
failed) vendor-id=10DF device-id=%d revision=%r
Meaning:
An attempt to register the HBA interrupt service routine with the operating
system on the host failed.
%d: device id (e.g., F980)
%r: Numerical value (1 to 3 digits)
Corrective action:
Hardware or a driver has a fault. If the error keeps recurring, contact your sales
representative or a field engineer.
Severity:
Warning
Action:
( / /T/S)
12039
lpfc:xxxx:xx:xx.x Adapter error (Adapter failed to init; mbxCmd
READ_CONFIG) vendor-id=10DF device-id=%d revision=%r
Meaning:
Initialization of the adapter failed.
%d: device id (e.g., F980)
%r: Numerical value (1 to 3 digits)
Corrective action:
425