Viewing Led Status - Paradyne Hotwire 8775 User Manual

Fields on this screen include:

Viewing LED Status

The status of the front panel LEDs can be viewed locally and remotely on the
Display LEDs status screen.
The 12 LEDs are organized in three groups:
T
T
T
To view the LED status screen, follow this menu selection sequence:
The LED status display screen is updated every 5 seconds. For information about
the meaning of the LEDs, see
8700-A2-GB25-10
Field . . . Contains . . .
Current Interval The number of seconds which have elapsed in the current
Timer 15-minute interval. Maximum value is 900 seconds (15 minutes).
This counter is reset every 15 minutes.
When zero, the port is disabled.
Payload Rate The rate of data transfer.
DSL Line Rate The rate of the DSL line.
General LEDs display the status of the unit.
Sync Port LEDs provide the status of the DTE interface.
DSL Loop LEDs display the activity on the DSL network.
Main Menu Status
main/status/leds
Slot: 4
GENERAL
--------------------------------------------------------------------------------
ALRM:Off
TEST:On
--------------------------------------------------------------------------------
February 2001
Display LEDs
DISPLAY CARD LEDs
SYNC PORT
P1:No DTR/RTS
P2:Lnk Up
P3:DCLB
P4:Disabled
ESC for previous menu
Front Panel LEDs on page 4-12.
4. Monitoring the Unit
Hotwire
Model: 87x5
DSL LOOP
P1:Lnk Up
P2:Startup
P3:OOF
P4:Lnk Dn
MainMenu Exit
4-11