Recovery Procedure - LeCroy WaveSurfer MXs-B Getting Started Manual

Note: The recovery process produces a replica of the operating system and
oscilloscope application software at the current revision levels when the
oscilloscope was manufactured. Any further revisions of the application software,
Windows operating system, and virus scan definition files are not automatically
upgraded. Therefore, after completion of the disk image recovery, it is highly
recommended to search vendor Web sites and upgrade the individual
components to current revision levels. The current oscilloscope application
software can be downloaded directly from the LeCroy website at
www.lecroy.com. Since the calibration data for the oscilloscope is stored in the D:
drive, current calibration constants are not overwritten during the recovery
process.

Recovery Procedure

1. Connect a network cable to the LAN port on the rear of the
oscilloscope if you intend to activate windows through the Internet.
2. Connect a keyboard and a mouse to the oscilloscope.
3. Apply power to the oscilloscope.
4. As soon as the Starting Acronis Loader... Press F11 for Acronis Startup
Recovery Manager message appears on the screen, press the F11 key
until the recovery software logo appears momentarily. The Acronis
True Image Echo Workstation main window is displayed.
Note: Do not press F11 before you see the Starting Acronis Loader message
or you will enter the MB boot sequence selection.
5. Select Recovery from the Main Menu. The Restore Data Wizard
opens.
6. Click Next on the Welcome page.
WSMXs-B-GSM-E Rev A
W S
AVE URFER
MX -B O
S SCILLOSCOPE
118