Table of Contents
Advertisement
G
S
ETTING
TARTED
Using Toolbar Shortcuts
These toolbar shortcuts can be used to perform specific actions for the channel
corresponding to the current setup dialog.
For more information on Measure, Zoom, Math, and Memories (Reference
Waveforms), refer to the section dealing with that subject.
Opens a Measurement selection pop-up menu. You can then select
up to 6 parameters (measurements) for the active channel from
this menu without leaving the Channel Setup dialog. The parameter
automatically appears below the grid.
Creates a zoom trace of the channel signal. The zoom trace
becomes active, and you can use the Vertical and Horizontal
controls to modify its scale and position.
Opens a Math selection pop-up menu. You can then select a math
function for the active channel from this menu without leaving the
Channel Setup dialog. The Math trace is then displayed in its own
grid.
Copies the channel trace into its corresponding Memory (Reference
Waveform) location. For instance, C1 is loaded into M1, C2 is
loaded into M2, etc.
Automatically performs a vertical scaling that fits the waveform
into the grid.
Opens a Labeling pop-up menu that allows user-defined labels tied
to the waveform.
35
M
ANUAL
WSMXs-B-GSM-E Rev A
Advertisement
Table of Contents
