Serial Trigger And Decode (Optional); Accessing Serial Decode Triggers - LeCroy WaveSurfer MXs-B Getting Started Manual

S T
ERIAL RIGGER AND
Optional WaveSurfer MXs-B capabilities support triggering and decoding of many
serial data protocols. Please refer to the LeCroy website for a list of supported
standards.
The serial triggers are integrated into the oscilloscope. All serial triggers are
selected through the normal oscilloscope trigger menus. Serial data signals are
input to the oscilloscope through probes.
Decoding is accessed from the Analysis pull-down menu in the menu bar. The
decoding is overlaid on top of the appropriate channel, and is intuitively presented
and color-coded for quick understanding. Included is a Search capability for
specific messages and a table to display protocol data in summary form
underneath the oscilloscope grid.

Accessing Serial Decode Triggers

Serial triggers can be accessed in two ways:

Touch the Trigger Descriptor Box in the lower right hand corner of the
oscilloscope display.
OR

Touch Trigger → Trigger Setup from the Menu Bar. On the Trigger dialog,
touch Serial on the Type section.
Select the appropriate serial trigger. The menu automatically changes to a
different tab in the Trigger dialog reflecting the selected standard.
WSMXs-B-GSM-E Rev A
W S
AVE URFER
D (OPTIONAL)
ECODE
MX -B O
S SCILLOSCOPE
50