Offset/Delay Control; E-Mail - LeCroy WaveSurfer MXs-B Getting Started Manual

Offset/Delay Control

As you change the timebase, this control allows you to either keep the horizontal
offset indicator stationary (when Div is selected) or to have it move with the
trigger point (when Time is selected). The advantage of selecting Div is that the
trigger point remains on the grid as you increase the timebase. If Time is selected,
the trigger point could move off the grid.
Note: Regardless of whether you select Time or Div, the Delay shown in the
timebase setup dialog always indicates time. However, when Div is selected for
Delay In, the delay in time is scaled proportional to the change in timebase,
thereby keeping the division on the grid constant.

Touch Utilities  Preferences from the menu bar.

Touch the Offset/Delay tab.

Under Offset Setting constant in:, touch either the Volts or Div button.

Under Delay Setting constant in:, touch either the Time or Div button.

E-mail

Before you can send e-mail from the oscilloscope, it must first be configured.

Touch Utilities  Preference Setup... from the menu bar.

Touch the E-mail tab.
Choose an e-mail server protocol: MAPI (Messaging Application Programming
Interface) is the Microsoft interface specification that allows different messaging
and workgroup applications (including e-mail, voice mail, and fax) to work through
a single client, such as the Exchange client included with Windows 95 and
Windows NT. MAPI uses the default Windows e-mail application (usually Outlook
Express). SMTP (Simple Mail Transfer Protocol) is a TCP/IP protocol for sending
messages from one computer to another through a network. This protocol is used
on the Internet to route e-mail. In many cases no account is needed.
If you chose MAPI, touch inside the Originator Address (From:) data entry field
and use the pop-up keyboard to type in the instrument's e-mail address. Then
touch inside the Default Recipient Address (To:) data entry field and use the pop-
up keyboard to enter the recipient's e-mail address.
If you chose SMTP, touch inside the SMTP Server data entry field and use the pop-
up keyboard to enter the name of your server. Touch inside the Originator
Address (From:) data entry field and use the pop-up keyboard to type in the
instrument's e-mail address. Then touch inside the Default Recipient Address
WSMXs-B-GSM-E Rev A
W S
AVE URFER
MX -B O
S SCILLOSCOPE
114